Monroe-electronics Resistance Meter - Surface - Test Kit - model 292 Manual do Utilizador descarregar pdf (Página 3)

Page 3 of 9

Specifications

Range: 1.0 x 10

to 1 x 10

 @ 10V

1.0 x 10

to 1 x 10

 @ 100V

Accuracy: 1.0 x 10

to 9.9 x 10

 @ 10V 10% of reading at 70-80

F; 15–60% RH

1.0 x 10

to 1 x 10

 @ 100V 10% of reading at 70-80

F; 15–60% RH

Open Circuit Voltages: 10 and 100 volts  3%

Electrification Period: 15 seconds

Temperature Accuracy:  5 degrees F and  3 degrees C Typ.

Relative Humidity: Range from 5% - 95%;  10% Typ.

Power: Two - Alkaline AA batteries

Battery Life: approximately 1500 measurements.

Meter Jacks: Left jack on meter accepts a 3.5 mm plug

Right jack on meter accepts a standard banana plug

Test Leads: Black lead terminated with a 3.5 mm plug one end and a standard banana plug on

the other

White lead terminated with a standard banana plus both ends

External Electrodes: Two NFPA-99 5-pound electrodes ( 80 oz.)  2oz with Shore A (IRHD) 50 – 70

durometer conductive pads that comply with EOS/ESD S4.1

Resistivity Electrodes: Parallel conductive silicone rubber electrodes 4 inches long and spaced 4

inches apart mounted onto an adapter sled

Meter Weight: 15.5 oz. With out adapter; 23 oz. with adapter

Dimensions: 8” L x 4.3” W x 1.6” H

Kit includes:

 Meter

 Protective carrying case

 Test leads

 Two NFPA-99 5-pound electrode weights

 Two AA Alkaline batteries

 Operator’s Manual

Resistivity adapter sled is optional and must be ordered separately.

Specifications are subject to change without notice.

1 2 3 4 5 6 7 8 9

Sem comentários

Monroe-electronics Resistance Meter - Surface - Test Kit - model 292 Manual do Utilizador Página 3