Monroe-electronics Electrostatic Fieldmeter - Static Monitor - model Manual do Utilizador Página 25
- Página / 96
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
24
From the File drop-down menu:
Select Open to retrieve a stored program fileneme.prg
Select Save to save a program
Select Restore Defaults to restore the default settings to all channels
Click on Get to select program 1 - 4, or retrieve the active program
Edit Channel- Each channel has its own alarm and warning levels, full-scale
setting and decimal setting. The auto zero time out and level are the same
for all 4 channels.
Disable Disables the channel display (three dashes across display)
Enable Enables the channel display
(display is active with green LED lit)
Alarm Enables the channel and alarm
(display is active with green LED
flashing)
Full-scale Sets the full scale range for the channel display.
Default is 1000v.
Alarm Level – When value exceeds this setting the alarm, if set,
will activate. Default is 9000v.
Warning Level - When value exceeds this setting the alarm, if set,
will activate. Default is 500v.
- Multi-Point Fieldmeter and 1
- Alarm System 1
- TABLE OF CONTENTS 2
- WARRANTY 3
- GENERAL 4
- SPECIFICATIONS 5
- Charged 6
- Surface 6
- INSTALLATION 9
- PRINCIPLE OF OPERATION 11
- Servicing 15
- 1 0 36 P ro be 16
- A s sem b ly 16
- Spacing 18
- Typical Setup 19
- OPERATION 20
- Remote LED 23
- 177A Software 24
- Optional 4 – 20 mA Module 31
- 4_20_APPNOTE_060607.cdr 33
- Upgrading the Firmware 34
- PROBE CONNECTION OPTIONS 36
- Figure A-I-1 38
- Figure A-I-2 39
- INTRINSIC SAFETY BARRIERS 43
- APPENDIX IV 48
- Application Note APNE-0003 51
- 1036 DATA 52
- APPLICATION NOTE APNE-0014 53
- I. Introduction 54
- Separation of charge 55
- APPLICATION NOTE APNE-0015 63
- VII. I. Introduction 64
- Grounded 65
- APNE-0016 66
- IX. III References 76
- APPLICATION NOTE APNE-0016 77
- Model 1036 Probes 81
- 1036 Probe 84
- Assembly 84
- Main Meter AssemblyProbe 86
- IV. References 87
- General 89
- Figure V-1 92
- Figure V-2 93
Manuais e produtos relacionados com Instrumentos de medida Monroe-electronics Electrostatic Fieldmeter - Static Monitor - model
(114 páginas)Noirot Radiadores manuales de usuario
Empezando en E
Comentários a estes Manuais